Importance of OSHA 10 Hour Courses

To provide safety to the workers should be the prime concern for the employers. Workers who work in risky and complicated workplaces are at the great risk of level. There are good chances that the worker may undergo from serious injuries and accidents. In this situation, it can be really bad for the health and life of the worker. Accidents and injuries in workplace increases the expense and cost of the employers, as they are required to provide the injured workers with the necessary treatment and if the injury is serious then the employers will have to search for the replacements for the injured worker. To control the situation, employer of the company is obliged to provide the required safety training.

OSHA 10 hour training course is for both the General and Construction Industry. This OSHA 10 hour course is designed to train the employees who work in construction and general industries about the fundamentals of occupational safety and health issues.

OSHA 10 hour training course helps the employers to train the workers and make them conscious of the basic principles to identify, reduce and report the hazards that are related to work. This OSHA 10 hour course is proposed for the job supervisors, construction workers, foremen and other working in the construction and general industry.

OSHA 10 hour course is specifically designed for the supervisors who are loaded with the health and safety of the employees. The objective of the course is to state the functions according to the OSHA Act and functions.

Joining OHSA 10 hour training will be very beneficial for the safety of the workers at the workplace. So don’t waste time and join today itself!

Comments

Common Lockout/Tagout Mistakes

Powered equipment is always a big risk if not handled carefully, even while shutting down as well. Numerous needless accidents occur when machines are turned on that is supposed to be locked out. Lockout or tagout related accidents are a needless yet serious issue. They cause small cuts or scratches but can also result in amputations, fracture or death. Any mechanical energy course, electrical, hydraulic, pneumatic or gas can be deadly if they are not controlled. Some common lockout or tagout mistakes employees make are listed below: 1.Mistake 1: Workers consider that since this job takes only a few minutes they don’t need to use a lock and consider only shutting the equipment controls. 2.Mistake 2: Many a times, workers leave the keys in the lock which is the biggest mistake they can make. Anyone can remove the lock without realizing it is protecting someone’s life. 3.Mistake 3: One most common mistake is to leave your job to another. If the lockout or tagout job is yours, make it a p...

Some Quick and Interesting Facts on OSHA

In order to ensure the health and safety of America's workers, the Occupational Safety and Health Administration (OSHA) was established by setting and enforcing standards. It aims to provide training and outreach to workers so that they can protect themselves from work related hazards. Here are a few facts that will help you know OSHA better: OSHA was created in the year 1971 by Congress. The latter gave it the mission of avoiding injuries, illnesses and deaths that are related to work and work places in the United States. Right from the time OSHA has been incepted, the rate of of occupational deaths has gone down by 50%. Also, all the work related injuries have been declined by 40%. There were around 5.7 million occupational illnesses and injuries among the U.S. workers in the year 1999. During the financial year of 2002, OSHA inspected around 37,493 workplaces. There are other 26 states that conducted their own OSHA programs. These states carried out an additional 58,402 inspecti...

Top 10 Violations revealed for 2010

At the National Safety Council Congress and Expo held in San Diego on the 5th of October, OSHA revealed the ten most cited violations in the year 2010. This session was arranged specially for highlighting the enforcement efforts by the agency for things like fall protection, electric safety, hazard communication and the likes. The director of OSHA's directorate of enforcement programs, Thomas Galassi, shared with the NSC attendees the top 10 violations. It comes as no surprise that this year’s list was not considerably different from the violations that were listed in the past year. He says that the degree of consistency in these violations has been maintained from year to year. All these violations are related to falls, contact with equipments and exposure to harmful substances. These violations are as listed below: 1.Accidents related to scaffolds. 2.Lack of fall protection programs or equipments. 3.No proper hazard communication. 4.Lack of respiratory protection. 5.Injuries rela...

10 Hour OSHA Certification

Search This Blog